Platinum Tools®

We Make Connections EZ!

Adjustable Fiber Optic Stripper with Ergonomic Grips

P/N 15060C

Share:
  • Twitter
  • Facebook
  • Google Plus
  • LinkedIn
Print:
  • Print This Page

The Adjustable Fiber Optic Stripper is designed to be versatile and economical without compromising the expectations of the professional installer. All stripping surfaces are precision ground and hardened for durability and long life. The circular notch is designed to strip a full range of outer fiber cable jacket insulations. The "V' notch will strip/remove a full range of fiber buffer and coating materials. The brass adjustment screw allows for precise adjustments and locks into place once set.

  • Uses "V" notch for stripping 250μ to 500μ fiber coatings and 500μ to 900μ tight buffer. (Loose Tube to 1500μ).
  • Round notch strips outer cable jacket insulations to 3.0 mm diameter.
  • Cushioned grip handles provide positive, non-slip, comfortable operation.

Part Numbers

15060C
Adjustable Fiber Optic Stripper w/Ergonomic Grips

Tips

How you use your tools is just as important as what tool you choose for an application.

Combing Your Braid
Coax stripping EZ!

Combing Your Braid — Coax stripping EZ!

Tired of pulling the braid back over your coax cable jacket and getting little pieces of braid in your fingers?

Do it the EZ way! Cut a small piece of Velcro, the 'prickly' side, and stick it on the side of your coax stripper. You now have a comb to brush back the braid over the jacket. You will be happy with how nice and even the braid looks and your fingers will be happy too!

Listen To Your Stripper
Your Coax stripper!

Listen To Your Stripper — Your Coax stripper!

When stripping coax, do not turn your tool around as though it were a propeller.

As you rotate your tool, listen to the cutting of the braid and when it stops talking to you, turn another 1/8 to a 1/4 turn, open tool and remove the stripper. When rotating, be sure the hand that is holding the cable is supporting the cable immediately next to the tool. Allow no cable play!

'POP' Your Cable Jacket
No more knicks.

'POP' Your Cable Jacket — No more knicks.

When using your Cat5 Cable Jacket Stripper, do not rotate it around & around & around. You want to score the jacket, not cut through it. Then remove the tool, and slightly bend the cable where it is scored and it will 'pop' and separate, viola! This way you will know for sure you have 'no' nicks on the conductors.

FREE TOOL, Twisted Pair Separator
Who says nothing's free?

FREE TOOL, Twisted Pair Separator — Who says nothing's free?

What do you do with the small piece of twisted pair cable jacket when you remove it, exposing the 4 pairs to prep for terminating?

Don't throw it away! It's a free tool & handy too. You can use it to separate the individual wire pairs by simply pushing and turning at the same time. Be sure to turn in the opposite direction of the twist and open up each pair end down to the cable jacket. For a professional version of your free tool, separator, take your scissors and cut jacket at an angle!

Cut Strip Terminate Test

Review Your Tool

Save Review

Register for Download


Optional

BUY IT NOW

Enter your location to find a reseller near you!

Buy local or online?

Location is required!

Where to Buy

Enter your zipcode to find a reseller near you!

Where to Buy

Enter your zipcode to find a reseller near you!

Where to Buy

Enter your zipcode to find a reseller near you!

Where to Buy

Enter your zipcode to find a reseller near you!

WARNING: Platinum’s EZ-RJ45 connectors and crimp tools are designed to work as a system. Platinum Tools’ products are NOT intended to be compatible with other brands and such unintended use can result in bad connections, breakage, and human safety hazards, and will also void the warranty. Platinum is not responsible for any unintended uses of its products.