Hammer-On Multi-Purpose J Hooks
P/N JH-HO Series
Hanger - Angled Overhang 45º with 1/4
Hanger - Hammer On 1/8 Thru 1/4
Hanger - Hammer On 5/16 Thru 1/2
Installation Tool - Eye Lag Driver - Fits Into Any Drill, 1/4 HEX
Installation Tool - Vertical (JH901-100) and Angled Overhang (JH902-100)
Pressed Beam Clamp for 1/2
Standard Multi-Purpose J Hooks
Threaded Rod - 1/4-20 Male Coupler with 3/4
Threaded Rod - 3/8-16 Male Coupler with 2
Threaded Rod - 3/8-16 Male Coupler with 3/4
Vertical Overhang 180 Degree with 1/4
Tips & Tricks
Listen To Your Stripper
Your Coax stripper!
Listen To Your Stripper — Your Coax stripper!
When stripping coax, do not turn your tool around as though it were a propeller.
As you rotate your tool, listen to the cutting of the braid and when it stops talking to you, turn another 1/8 to a 1/4 turn, open tool and remove the stripper. When rotating, be sure the hand that is holding the cable is supporting the cable immediately next to the tool. Allow no cable play!