CAMARILLO, Calif., July 5, 2012 – Platinum Tools\uf0d2 (www.platinumtools.com), the leader in solutions for the preparation, installation and hand termination of wire and cable, is proud to announce the launch of the new VDV MapMaster\u2122 2.0 voice, data, and video tester. Now with cable length measurement, the VDV MapMaster\u2122 2.0 is now shipping with an MSRP of $129.95.<\/p>\n
\u201cThe VDV MapMaster 2.0 now combines cable length measurement with continuity testing, mapping, and tone generator functions into a single unit,\u201d explained Lee Sachs, Platinum Tools, Inc. president and general manager. \u201cMade in the USA, the VDV MapMaster is capable of identifying and mapping 19 locations at one time. Whether the job is commercial or residential, the versatility and added features of the VDV MapMaster 2.0 makes it an installer\u2019s best friend.\u201d<\/p>\n
Length Mode is used to measure the length of entire cables and its pin pairs and allows for viewing and adjusting the length constant value for video, data, and voice cables. The VDV MapMaster tests Cat-6, Cat5e, Cat-5, Cat-4, Cat-3, and coax cables, as well as shielded cables. Video and data cables can be connected to their respective remotes at the same time to improve testing efficiency. Patch cables may be tested without removing the master remote from storage.<\/p>\n
With a convenient size and weight of only 6.4in x 2.8in x 1.4in and just 9.0 ounces, additional features of the VDV MapMaster include:
\n\u2022\tTests voice (six wire), data (eight wire), and video (coax)
\n\u2022\tMeasures the entire length of a cable and\/or individual wire pairs within the cable
\n\u2022\tEasy-to-read , extra large 7-segment LCD screen with large icons
\n\u2022\tTone generator with selectable tone cadence and selectable pins carrying tone
\n\u2022\tRJ (voice and data) master remote stores in bottom of case
\n\u2022\tMap 19 locations at one time
\n\u2022\tMeasures length in feet or meters
\n\u2022\tTests and indicates pins with shorts, opens, reversals miswires and split pairs
\n\u2022\tDisplays \u201cPass\u201d icon for correctly wired T568A\/B and crossover\/uplink
\n\u2022\tDisplays \u201cPass\u201d icon for correctly wired 6-pin telephone plus \u201cRev\u201d for reverse pinned
\n\u2022\tVoltage detection warning icon
\n\u2022\tLong battery life; low battery icon indicator
\n\u2022\tAuto power off<\/p>\n
Numerous accessories for the VDV MapMaster 2.0 are also available.<\/p>\n
For more information on Platinum Tools and its complete product line, please visit www.platinumtools.com, call (800) 749-5783, or email info@platinumtools.com.<\/p>\n
About Platinum Tools
\nPlatinum Tools, founded in 1997, was created based upon two very simple objectives. First, develop the absolute best possible solutions for the preparation, installation, and hand termination of wire and cable. Second, implement an operational infrastructure that can deliver these products in an efficient, timely, and high quality manner.<\/p>\n
All of our products must absolutely satisfy three critical benchmark criteria\u2026utility of function; quality of function; and economic value. Our people are our company. They, too, must be focused on and work to satisfy three critical benchmark criteria\u2026customer satisfaction; product knowledge and expertise; and willingness to learn and adapt.<\/p>\n
# # #<\/p>\n","protected":false},"excerpt":{"rendered":"
CAMARILLO, Calif., July 5, 2012 – Platinum Tools\uf0d2 (www.platinumtools.com), the leader in solutions for the preparation, installation and hand termination of wire and cable, is proud to announce the launch of the new VDV MapMaster\u2122 2.0 voice, data, and video tester. Now with cable length measurement, the VDV MapMaster\u2122 2.0 is now shipping with an MSRP of $129.95….